Home
LWD History
Board of Directors
2010 Annual Newsletter
2009 Annual Newsletter
Agendas & Minutes
Notice of Public Hearing
Customer Service
20-Gallon Challenge
Conservation Tips
Water Rates
Meter Installation Charges
Reading your meter
Reward Program
Urban Water Management Plan
Urban Water Conservation
Contact Us
Directions
Drought Response Conservation
Jobs
e-mail me
 
How to read your water meter

Water meters are precision instruments built to accurately
measure both large and small amounts of water for many years. Although yours may
look a little different, the dial pictured here is typical of most residential
meters
.


1. Leak Detector
A triangle that rotates, even with very small amounts of water moving through
the meter.  If the triangle turns when all water is off in the house, you have a
leak that should be investigated further.  You may wish to hire a professional
to help you find “mystery” leaks.  


2. Sweep Hand
Each full rotation of the sweep hand indicates one cubic foot, or 7.48 gallons
of water, has passed through the meter.  The markings around the outside of the
dial indicate tenths and hundredths of one cubic foot. 


3. The Register
Just like the mileage odometer on your car, these numbers keep a running total
of all water that has passed through the meter since it was new (this one shows
36,810 cubic feet total).  Subtracting the last read from these numbers will
tell you how many cubic feet of water have registered.  Multiply by 7.48 to get
gallons.


What's in a UNIT? 
Water
charges are based on increments of 100 cubic feet of water delivered, or what we
call a billing unit.  One unit equals 748 gallons.  When the meter reader record
the numbers on your meter, he or she disregards the number in black, recording
only the numbers in white (multiples of 100).  In the example above, the read
shows on this customer’s water bill should be 368. 


Water Equivalents Table



























1 cubic foot   =7.48 gallons= 62.4 pounds of water
100 cubic feet =748 gallons= One billing unit
1 million gallons=3.07 acre feet  =1,337 units
1 acre foot*=325, 851 gallons=Covers 1 acre of land, 1 foot deep






 

|Home| |LWD History| |Board of Directors| |2010 Annual Newsletter| |2009 Annual Newsletter| |Agendas & Minutes| |Notice of Public Hearing| |Customer Service| |20-Gallon Challenge| |Conservation Tips| |Water Rates | |Meter Installation Charges | |Reading your meter| |Reward Program| |Urban Water Management Plan| |Urban Water Conservation| |Contact Us| |Directions| |Drought Response Conservation| |Jobs|